Advertisement
Quick Links
OPTIMUM RADIANT HEATER
EH600 SERIES
• Metal radiant heater with non glowing element
• Adjustable wall and ceiling bracket
• Black anodised aluminium
• 1.5m long power cord
• Designed for indoor and outdoor use
• Ideal for use in alfresco areas, verandahs and garages
• EH633 + EH633R - requires 15A power point to be installed by qualified electrician
Gasmate
is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au
®
Important: Retain these instructions for future use.
03455 05/16
Aber Holdings Ltd - N.Z www.gasmate.co.nz
03240 07/16
Advertisement
Related Manuals for Gasmate OPTIMUM EH633R
Summary of Contents for Gasmate OPTIMUM EH633R
- Page 1 • Ideal for use in alfresco areas, verandahs and garages • EH633 + EH633R - requires 15A power point to be installed by qualified electrician Gasmate is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au ® Aber Holdings Ltd - N.Z www.gasmate.co.nz Important: Retain these instructions for future use.
-
Page 2: Installation
solvents and sharp edges. Check the power cord regularly For any queries or assistance call for any damage and if the power cord becomes damaged have it replaced by an authorised service facility. Extension Cords and Reels This heater is NOT designed to run off an extension cord. Customer Service If you require an additional power point please have one installed by a qualified electrician. -
Page 3: Specific Safety Instructions
Specific Safety Instructions WARNINGS Do not use the heater in areas where there is a • DO NOT attempt to modify the heater, risk of explosion or fire from flammable gases. power cord, power plug or the supplied Ensure that the heating area is kept clear of combustible accessories in any way. -
Page 4: Electrical Data
Electrical Data IMPORTANT This product is fitted with a sealed electrical connection plug that is compatible with the heater, the mains supply for Australia and meets the requirements of international standards. This heater must be connected to a supply voltage that is equal to that stated on the rating label. -
Page 5: Mounting Heater
Mounting Heater General Mounting Suggestions If unsure please discuss with your local hardware store. • Ensure the fixing screws are at least suitable for 10Kg each. • If fitting to a stud wall or ceiling ensure all fixing screws are into timber. Plasterboard IS NOT suitable by itself. - Page 6 Ceiling Mount with Chain Only use this mounting option if your ceiling is too high. 1. Attach the bracket (C) as noted below. 2. Cut chain (D), not supplied, to desired length. 3. Using nut and bolt attach chain to bracket (C) and bracket (B).
- Page 7 Heater Positioning eave/ceiling 1. Position heater at least 200mm from the eave lining or ceiling or wall at 90˚ to heater. 2. Position heater at least 1.8m above the floor. 3. Never position in front, above or below a power point. 4.
- Page 8 Monday to Friday 8.00am - 5.00pm EST Keep your purchase receipt, this will be required to make any claims under the 12 month warranty. Gasmate ® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au Aber Holdings Ltd - Hamilton, N.Z www.gasmate.co.nz...