Harman Kardon DVD 27 Owner's Manual page 21

and controls. The banner is accessed from the Video
Setup submenu. Press the Setup Button j to dis-
play the Setup menu, and then press the
Navigation Buttons n until the Video Setup sub-
menu icon is highlighted. Press the Enter Button
s to access the Video Setup submenu, then scroll
down to the Video Adjustment line and press the
Enter Button s again. Select On to display the
Video Adjustments banner. The Setup screen will dis-
appear from view.
Figure 8
To change any of the video adjustments shown, first
Navigation Buttons n so that
press the
⁄¤
the parameter's setting bar is highlighted. Use the
Navigation Button n to increase the setting or the
Navigation Button n to decrease the setting.
‹
Changes to any of the settings may be made while a
test disc is playing, or you may use the internal test
signal by pressing the Navigation Buttons
⁄¤
n until the word OFF is highlighted next to the
TEST SCREEN line. To activate the test signal,
press the Enter Button s and note that a special
combination test signal, including both color bars and
gray scale along with 100% black and white fields, will
be displayed behind the video adjustments banner.
See the Test Screen section on page 22 for more
guidance in making picture adjustments.
To adjust the Brightness setting, use the
Navigation Buttons n until the area between the
"–" and "+" signs is highlighted, then use the ‹›
Navigation Buttons n to increase or decrease the
setting.
When adjusting the Black Level setting, only two
adjustments are available: either the complete bar will
appear, which provides a full "0 to 100" black level
setting, or "full", which complies with standards for
video with what is called "setup"; or only a thin line will
appear, which represents a "7.5 to 100" black level
setting.
To remove the banner from the screen so that only the
test screen appears, simply wait a few seconds, and
the banner will disappear. Press any button on the
remote to restore the banner to view.
When you have finished making your video adjust-
ments, press the
⁄¤
until the word Done is highlighted, and press the
⁄¤
Enter Button s. The DVD 27 will return to the
Video Setup submenu.
In order to recall the video adjustments menu, you will
need to press the Setup Button j and navigate
through the menu system as described above.
When you have finished using the Setup menus, press
the Setup Button j to clear the screen. If a DVD
is loaded, the splash screen will appear. If any other
type of disc is loaded, the Player Information menu will
appear. You may now proceed to page 23 to learn the
basics of operating the DVD 27.
›
⁄¤
Navigation Buttons n
SYSTEM SETUP
SYSTEM SETUP 21