Introduction And Quick Start; Before Making Connections; Box Contents; In-Use Notices - MartinLogan MP500 Operating Manual

1. INTRODUCTION AND QUICK START

Thank you for purchasing the MartinLogan MP500. All
MartinLogan products are engineered to recreate the passion
of a live musical performance and emotional involvement
experienced in the best movie theaters by utilizing the highest
level of circuit design, superior parts and manufacturing
techniques, innovative features, and intuitive ergonomics.
We are confident that their inclusion in a system significantly
enhances the enjoyment of recordings.

1.1 BEFORE MAKING CONNECTIONS

Check that you have received all items listed below and report
discrepancies to your dealer as soon as possible. In case
the MP500 needs to be transported in the future, keep the
packing materials. Retain the invoice that you received from
your authorized MartinLogan dealer at time of purchase. The
invoice is necessary to obtain service under warranty.

1.2 BOX CONTENTS

• MP500 Amplifier
• Rack Mount Ears
• Euroblock Connectors (Preinstalled)
• Power cord

1.3 IN-USE NOTICES

• Disconnect the power cord or flip the AC switch to OFF
before connecting or disconnecting any components.
• If the MP500 was transported or stored in the cold, let it
reach room temperature before use.
• Do not remove the top cover.
• Do not modify the product.
• Due to continuing advances, operational characteristics
may change. If this manual contains discrepancies, please
check www.MartinLogan.com for the latest manual.
5

1.4 RACK AND SHELF MOUNTING

The MP500 ships with both rack mount ears and feet for shelf
mounting. Before rack mounting the unit, it is recommended
to remove the feet on the bottom of the unit. To attach the
rack mount ears, install as shown in the following diagram.
If a dual amplifier installation is desired, an optional MPX500CB
Connector Bracket (sold separately) is available. This bracket
connector affixes two amplifiers side-by-side, as shown in the
following diagram.