Dsp Presets; Dip Switch Functionality; Dsp Preset Dip Switch Positions - MartinLogan MP500 Operating Manual

3. DSP PRESETS

The MP500 is loaded with a variety of DSP presets to both
improve performance of the speaker, but also to protect it
from being overdriven by the amplifier.
DSP preset availability will change over time, and can be
updated via the USB connection on the back of the amplifier.
For the most up to date list of presets, please refer to the
MP500 product page on martinlogan.com.
Using the bank of dip switches on the back of the amplifier you
may choose from the following DSP preset options:

3.1 DIP Switch Functionality

Pin1: SPDIF select. Optical/Coaxial
Pins 2-5: 16 groups of EQ presets
ex: Pins 2-6: 00000=EQ0
ex: Pins 2-6: 10000=EQ16
ex: Pins 2-6: 11111=EQ31

3.2 DSP PRESET DIP SWITCH POSITIONS

MP500 ships in its Flat EQ, 2 Channel, Full Range, Stereo output
mode. To view the most up to date list of custom DSP Preset
options available, please visit the MP500 product page on
martinlogan.com: www.martinlogan.com/en/product/mp500
The firmware update section of this page will always contain
the latest DSP Preset list and the DSP/Firmware update file.
Updating your MP500's DSP/Firmware is easily done using
a Windows PC and a commonly available Micro USB cable
(Not Included) by following the instructions posted with the
update file.
12