Installation Procedure - Toto CLAYTON TB784DD Installation And Owner's Manual

INsTALLATION PROCeDuRe

1. Drill two 1" diameter clearance
holes 6-1/2" apart from center-to-
center.
Note: Ensure deck has sufficient
strenght to support the faucet.
2. remove the nut, washer, and
gasket from shank. place the shank
through the hole from the top. replace
the nut, washer, and gasket in reverse
order. Tighten the nut with wrench.
repeat procedure for the other shank.
3. apply pipe tape onto thread of
connector. screw the connector into
the shank. secure the body assembly
to the connector. repeat procedure for
the other shank.
!
CAUTION
To prevent marring surface finish, use
soft-jaw pliers.
Note: To create proper seal and
fit, apply SUFFICIENT pipe tape
onto the thread of the connector.
1" dia. (2.5cm)
6-1/2" (16.5cm)
Center - center
gasket
4
shank
Flange
o-ring
gasket
Washer
nut
Connector
nut
shank