Advertisement
Step 1
You will need
16 x Flat
4 x Bolts
Washers
(H1)
(H2)
4 x Legs
Phillips Head
(P2)
Screwdriver
8 x Screws
1 x Allen Key
(H3)
(H4)
If the bolt can't be fitted into
the hole well,
please slope the leg until the
bolt can be inserted into the
hole completely as picture
showed, then screw the bolt to
the bottom.
fantasticfurniture.com.au
To attach a leg to the chair, first align the leg plate to the holes on
the underside of the chair. Ensure that the leg is facing the correct
way. First attach the leg with 2 x bolts (H1) and 2 x washers (H2) by
tightening with the allen key (H4) as shown. Then fix 2 x screws
(H3) and 2 x washers (H2) through the remaining 2 holes,
tightening with the phillips head screwdriver. Repeat this for the
remaining legs. Ensure to tighten bolts and screws fully.
Page 5
Advertisement
