Heath Zenith Secure Home DualBrite 4541 Manual page 3

WIRING
Note: All wiring should be run in accordance
with the National Electrical Code through
conduit or another acceptable means.
Contact a qualified electrician if there is
any question as to the suitability of the
system.
Black
Green
or Bare
White
One Motion Light
White
Black
Green
or Bare
Two Motion Lights
200257-02
Light
Fixture
Light Light
Fixture Fixture
Connect the fixture wires to the wires in the
junction box. Twist the wires together and
secure with wire connectors.
Recommended Grounding Method
1. Loop the fixture ground wire around the
fixture ground screw (located on mounting
bracket) once.
2. Tighten ground screw.
3. Attach end of fixture ground wire to the
bare ground wire inside the junction box
using supplied wire nut.
If you are uncertain about the grounding
method, consult your local building code.
Black to black
3
White to white