Advertisement
Available languages
Available languages
How to Use
BEFORE FIRST USE: Wash bowl
and attachments in warm, sudsy
water; rinse and dry. Always
unplug mixer from electrical outlet
before inserting or removing
attachments.
4
Place bowl in bowl lock and turn
clockwise until bowl locks into
place.
1
Always make sure mixer is
unplugged and setting control
is set to OFF ( ).
5
Insert attachment onto attachment
shaft and press upward as far
as possible. Turn the attachment
clockwise, hooking attachment
over pin on shaft.
w WARNING
Cut and Crush Hazard.
Unplug mixer before inserting or removing attachments.
Failure to do so can result in broken bones or cuts.
2
Press up on mixer release button.
6
Slide the narrow section of the
pouring shield collar under mixer
attachment.
3
Tilt mixer head up.
7
Place pouring shield collar on
bowl. Sides of shield should be
above the rim of the bowl when
positioned correctly.
5
Advertisement
