Caution:
Do not select Presentation Mode unless you have provided a means
to trigger the scanner. The 3800E does not have a manual trigger
switch. To operate in Presentation Mode with low ambient light, users
may have to provide a switch to ground the trigger line or use serial
trigger commands via the serial port interface
Commands" on page
Presentation Mode: The LEDs are off until a bar code is presented to the
scanner. Then the LEDs turn on automatically to read the code. Presentation
Mode uses normal office or store ambient light to detect the bar codes.
Note: Do not use Presentation Mode with a 3800EPDF. Normal office or store
ambient light does not provide enough illumination for the 3800EPDF to
work properly in Presentation Mode.
2 - 6
10-4).
IMAGETEAM™ 3800E User's Guide
(see "Trigger
Presentation Mode