Hand Held Products IMAGETEAM 3800E User Manual page 16

For example, an IBM AT terminal has a Terminal ID of 003. You would scan the
Terminal ID bar code, then 0, 0, 3 from the inside back cover, then Save. If you
make an error while scanning the digits (before scanning Save), scan the
Discard code on the back cover, scan the Terminal ID bar code, scan the digits,
and the Save code again.
Terminal ID
Save
Note: After scanning one of these codes, you must re-boot your computer.
1 - 4 IMAGETEAM™ 3800E User's Guide