Including Items; Important Information - Panasonic VL-VC3500BX Operation Instruction Manual

1. Including items

The following items are included in addition to the door station.
Part
Embedded box:
Trepanning a hole on the wall, insert
the embedded box, and fix it with the
cement slurry.
Embedded box adapter board: for fixing
2 wire connector: AWG24, for power port.
2 wire connector: AWG26, for 485 port.
3 wire connector: AWG24, for lock port.
3 wire connector: AWG26, for lock relea-
Screwdriver
Screw & Gasket: M3*8, Locked the Outd-
Remarks: Two sets of regular use.
Screw: M3*6, Fixed embedded box and
Remarks: Regular use of two.
Sponge Pad: Paste to the embedded box
Name
the equipment.
se button & door state
port.
oor unit to the embed-
ded box.
embedded box adapter board.
if the anti-movement butt-
on can not touch to embed-
ded box.

2. Important Information

2.1 Important safety information
Count
To prevent severe injury or loss of life or property, and to ensure
proper and safe operation of your product, read this section carefu-
lly before using the product.
1
WARNING
Preventing fire, electric shock, and short circuits.
2
・Leave installation work to the dealer. Installation work requires
technical knowledge and experience. Electrical connection work
1
should be performed by certified personnel only. Failure to obs-
erve this may cause fire, electric shock, injury, or damage to the
1
product. Consult the dealer.
1
・Use only the power supply unit VL-PC3400.
・Do not place objects on the power cables. Install the product
1
where no one can step or trip on the power cables.
・Do not allow the power cables to be excessively pulled, vent or
1 placed under heavy objects.
・Make sure all connections from the power outlet to the power
supply unit are secure.
4
・Never touch the power supply unit and power cables with wet
hands.
・Do not use the power supply unit for outdoor installations (it is
4 for indoor use only).
・Do not disassemble or modify the product. Refer servicing to an
authorised service centre when service is required. Disassembling
the product or manipulating the product in a way not described
1
in the documentation may expose you to dangerous voltages and
other risks.
・Do not touch the product or the power supply unit during an ele-
ctrical storm. There may be a remote risk of electric shock from
lightning.
1 2