Advertisement
6.
Navigate to file upload
Click the menu in the top right corner,
then Firmware Update
7.
Click Update Firmware
8.
Navigate to file upload
Click Browse or Choose File. Select
the file downloaded in step 1
BDA3_2020_06C_OldMB.bin
Then click Update Firmware.
The front power LED will blink green
while uploading, blink yellow while
programming, then go solid yellow
with all input LEDs green.
The unit will reboot itself and all input
LEDs will go green again once more
briefly. When the front power LED is
green and only one input LED is lit,
you can proceed.
Advertisement
