Numark MIXSTREAM PRO Quick Start Manual page 7

Rear Panel
1. Main Outputs (XLR, balanced): Use standard XLR cables to connect these outputs to
loudspeakers or an amplifier system. Use the Main knob on the top panel to control the
volume level.
2. Main Outputs (RCA, unbalanced): Use standard RCA cables to connect these outputs
to loudspeakers or an amplifier system. Use the Main knob on the top panel to control
the volume level.
3. SD Card Slot: Insert a standard SD card to this slot. You can use the touchscreen to
select and load tracks from your SD card.
4. USB-A Ports: Connect a standard USB drives to these USB ports. When you select a
USB drive as a source, you can use the touchscreen to select and load tracks from your
USB drive. You can also connect a keyboard to these ports to easily search through your
library.
Note: Although Mixstream Pro can play tracks that have not been analyzed yet, pre-
analyzing them allows its features to work most effectively. We recommend using the
Engine DJ software to configure your music library on your SD card or USB flash drive
before connecting to Mixstream Pro. See the full User Guide for more information.
5. PC USB-B Port: Use a standard USB cable (included) to connect this USB port to an
available USB port on your computer.
6. Power Adapter Restraint: Secure the power adapter cable to this restraint to prevent it
from accidentally unplugging.
7. Power Input: Use the included power adapter to power the unit.
8. Power Button: Press this button to power Mixstream Pro on. Power on Mixstream Pro
only after you have connected all of your input devices and before you power on your
amplifiers and loudspeakers.
To power off Mixstream Pro, press this button and follow the prompts on the
touchscreen. Power off your amplifiers and loudspeakers before powering off Mixstream
Pro.
9. Vent: Make sure this vent is unobstructed while using Mixstream Pro.
1 2
3
6
8
4 5 7
9
7