Advertisement
Quick Links
Advertisement
Related Manuals for Numark Mixtrack Pro III
Summary of Contents for Numark Mixtrack Pro III
- Page 1 QUICK-START GUIDE NUMARK MIXTRACK PRO III...
-
Page 2: Installation And Setup
Installation and Setup The Numark Mixtrack Pro III requires drivers for both Mac and Windows. You will find these on the installation CD that is provided with your Numark Mixtrack Pro III, or go to http://www.numark.com NOTE: Please ensure you have the latest available drivers AND firmware updates, which may be required in order to be compatible with Serato DJ. - Page 3 Controller...
- Page 4 NOTE: The SHIFT button is used with other buttons that have shift modifier functions. Mixtrack Pro III Serato DJ Function Shift PERFORMANCE PADS SEE PERFROMANCE PAD SECTION FOR MORE INFORMATION PAD MODE Change Performance Pad mode PITCH NUDGE - Pitch nudge backward...
- Page 5 Numark Mixtrack Pro III Function 1/4” HEADPHONES Connect your 1/4” headphones to this output for cueing 1/8” HEADPHONES Connect your 1/8” headphones to this output for cueing MIC GAIN Adjust the input volume of the Mic Connect an TRS or 1/4” jack microphone to this input...
-
Page 6: Performance Pads
Performance Pads DJ-FX The DJ-FX in Serato DJ are powered by iZotope™. Click the FX tab to open the FX panel. Select either 1, 2 or M to assign the selected effect bank to a deck or Master Output. There are two available modes in the DJ-FX. Single FX Mode allows you to select one effect per FX bank, and has multiple parameters that can be adjusted. -
Page 7: Using The Tool Tips
MIDI Using the Tool Tips The MIDI feature in Serato DJ provides the ability to remap Serato DJ Click on the icon to enable Tool Tips. This is located in between software functions to your primary Serato DJ controller, interface or mixer. the MIDI and setup button in the top right hand corner of the screen.