Do you have a question about the 795.7305 series and is the answer not in the manual?
Questions and answers
Kim Kelly
April 11, 2025
Water dispenser stopped working after ice maker jammed
1 comments:
Mr. Anderson
April 11, 2025
The water dispenser on the Kenmore 795.7305 series may have stopped working after the ice maker jammed due to one or more of the following reasons:
1. Dispenser panel is locked – The control panel may be locked, which disables the water dispenser. Unlock it by pressing and holding the Lock button for 3 seconds.
2. Refrigerator or freezer doors not closed – The dispenser will not work if any door is open.
3. Water supply issue – The refrigerator may not be connected to a water supply, or the shutoff valve may not be fully open.
4. Kink in water source line – A kink may restrict water flow. Straighten the line.
5. Reverse osmosis system – If connected, it may reduce water pressure below the required level.
The ice maker jam may have led to a blocked chute or frozen line, which could also affect water flow if frost buildup extends into the water system.
This answer is automatically generated
Jo Ann Lovell
January 17, 2025
control panel not working, message F 6H is lit up.
Need help?
Do you have a question about the 795.7305 series and is the answer not in the manual?
Questions and answers
Water dispenser stopped working after ice maker jammed
The water dispenser on the Kenmore 795.7305 series may have stopped working after the ice maker jammed due to one or more of the following reasons:
1. Dispenser panel is locked – The control panel may be locked, which disables the water dispenser. Unlock it by pressing and holding the Lock button for 3 seconds.
2. Refrigerator or freezer doors not closed – The dispenser will not work if any door is open.
3. Water supply issue – The refrigerator may not be connected to a water supply, or the shutoff valve may not be fully open.
4. Kink in water source line – A kink may restrict water flow. Straighten the line.
5. Reverse osmosis system – If connected, it may reduce water pressure below the required level.
The ice maker jam may have led to a blocked chute or frozen line, which could also affect water flow if frost buildup extends into the water system.
This answer is automatically generated
control panel not working, message F 6H is lit up.