auto cooking
This feature allows you to cook most of your food based on the food category and the weight. Select
the category and choose the weight of your food. For quick reference of the cooking time and the
weight, please refer to the auto menu table.
1. Turn the upper dial (1) to "
"A-1".
2. Turn the lower dial (2) to select the auto menu you need
"A-1"... "A-8".
3. Press the Start/+30s/Confirm (3) button to confirm.
4. Turn the lower dial (2) to select the weight for your chosen
programme. Please refer to the auto menu table for
information.
GB
5. Press the Start/+30s/Confirm (3) button to confirm and start
cooking.
6. Press the Stop/Clear (4) button once to stop the cooking.
Press the Stop/Clear (4) button again to cancel the setting.
For instance: If you want to cook 350g of fish using the auto menu
programme, please follow the steps below.
1. Turn the upper dial (1) to "
select the auto menu programme for fish. The LED display
will show "A-6".
2. Press the Start/+30s/Confirm (3) button to confirm.
3. Turn the lower dial (2) to select the weight of your fish until
the LED display shows "350".
4. Press the Start/+30s/Confirm (3) button to confirm and start
cooking.
The density and thickness of food can affect its
cooking time. Ensure all food is piping hot and
cooked thoroughly before serving. It is essential
that food is checked during and after the
recommended cooking time, even if the auto-
cook menu was used.
42
". The LED display will show
", then turn the lower dial (2) to
Low
M.Low
Med
M.High
High
4
Stop/Clear
Start/+30s/Confirm
1
2
3