Power Connections - Cisco 3700 Series Hardware Installation Manual

Chapter 3 Installing the Router
Figure 3-14
Figure 3-15
After the router has been installed and properly grounded, you can connect the power wiring; the WAN,
LAN, and voice cables; and the cables for administrative access as required for your installation. For
cable connection procedures, see the
LAN, and Voice Cables" section on page
section on page

Power Connections

This section explains how to connect AC or DC power to Cisco 3725 and Cisco 3745 routers. It covers
the following topics:
•
•
•
OL-2180-08
NEBS-Compliant Ground Wire Connection on a Cisco 3745 Router Chassis
Ground lug
attachment
Chassis Ground Connection Using Ring Terminal on a Cisco 3745 Router Chassis
Ring terminal
3-22.
Connecting Routers to AC Power, page 3-12
Connecting Routers to a DC-Input Power Supply, page 3-12
Connecting Routers to the Cisco Redundant Power System, page 3-20
attachment
"Power Connections" section on page
3-20, and the "Connecting to a Console Terminal or Modem"
Cisco 3700 Series Routers Hardware Installation Guide
Power Connections
3-11, the "Connecting WAN,
3-11