aqprox! appLS12R User Manual page 21

Normal mode
If the barcode scanner works beyong 2.4G wireless
transmission range, it is suggestted use storage mode
which scanned date are stored in scanner storage.
Under storage mode, once a barcode is scanned, the
scanner will issue a short tone and scanned data is
automatically stored in barcode scanner storage.
If the internal storage is full, the scanner will emit three
low-frequency short tones to alarm.
Storage Mode
By scan "Total amount of stored barcode", to check
the total amount of scanned barcodes in storage;
Total Amount of Stored Barcode
Upload the stored data by scanning the "Data Upload"
barcode. After the data is uploaded, the barcode sto-
red in the barcode scanner won't automatically de-
leted. The user can upload the stored data multiple
times by scanning "Data Upload" barcode.
Data Upload
21