Connecting The Cable To The Terminal Block - Kanomax 6333 User Manual

2-3．Connecting the Cable to the Terminal Block
For easy cable connecting work, detach the supplied terminal block from the main unit.
You can remove the terminal block with the fingers.

This terminal block can be divided into two terminal blocks, 3P and 10P.

To connect the cable to the terminal block, push and hold the orange button with a

flat head screwdriver etc. and insert the cable into a terminal hole.
The size of the connecting cable is AWG26 to AWG20.

The length of an exposed wire is 8 mm.

※ For detailed specifications, please refer to the specifications etc. related to FK-MC 0,5/3-
ST-2,5-1881338 by PHOENIX CONTACT.
Cable: AWG26 to AGW20
13