Connecting the Probe Cable to the Main Unit
<Caution>
-
Make sure to cut the power supply to the main unit before connecting the probe cable (sold
separately).
-
The probe cable must be wired separately from the power line.
Match the concave part of the main unit connector with the convex part of the cable connector
(4-pin), and click them in (not a screw type).
Cable Connector (4-pin)
Connecting the Probe Cable to the Probe
<Caution>
- Make sure to cut the power supply to the main unit before connecting the probe and the
probe cable (do not supply power until both are connected).
- Match the concave part of the cable connector (5-pin) with the convex part of the probe
connector. Connect the probe and probe cable by rotating the screw portion
cable connector.
(Probe: Model 0963-00 shown for reference)
Main Unit Connector
6
A
of the
Cable Connector (5-pin)
A