Filling The Water Reservoir - Oster PRIMALATTE II TOUCH Instruction Manual

OPERATING INSTRUCTIONS

FILLING THE WATER RESERVOIR

1. Fill the water reservoir with water (see figure 1). You may use either a pitcher to fill it
up or remove it from the unit and then fill it up under the tap. Fill the reservoir with the
desired amount of water below the "MAX" level on the reservoir. Never use warm or
hot water to fill the water reservoir.
2. Close the water reservoir lid. If you removed it from the unit to fill up with water,
please make sure to place it back tightly in its place.
FILLING THE MILK RESERVOIR
If you plan to prepare a cappuccino or latte, remove the milk reservoir from the unit by
lifting up on the milk reservoir release button, simultaneously sliding milk reservoir out (see
figure 2). Then, pour the desired quantity of cold milk you estimate you will need, making
sure it is below the "MAX" level on the reservoir (see figure 3). Once finished, slide the milk
reservoir back onto the unit ensuring it fits tightly. You should feel the milk reservoir lock in
place.
NOTE: You can use any type of milk you prefer, i.e. whole milk, low fat milk, organic or soy milk.
BVSTEM6801_22SEPM1 (LA).indd 6 BVSTEM6801_22SEPM1 (LA).indd 6
Figure 1
Figure 2
English-6
Figure 3
2022/6/6 9:53 AM 2022/6/6 9:53 AM