Remove The Lcd Unit - Lenovo V17 Gen 3 Hardware Maintenance Manual

Hide thumbs Also See for V17 Gen 3:
Table of Contents

Advertisement

Figure 42. Disconnect and remove the touch pad cable
Refer to
https://support.lenovo.com/partslookup
replacement parts:
Touch pad cable

Remove the LCD unit

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board.
Figure 43. Disconnect the battery pack cable
Step 2.
Disconnect the EDP cable and antenna cables. Then, remove four screws.
54
Lenovo V17 Gen 3 Hardware Maintenance Manual
to look up the Lenovo part numbers of the following

Advertisement

Table of Contents
loading

Table of Contents