Remove The Microphone Rubbers - Lenovo V17 Gen 3 Hardware Maintenance Manual

Hide thumbs Also See for V17 Gen 3:
Table of Contents

Advertisement

Screw specifications
M2 x L2.2
M2 x L2.5
Step 2.
Disconnect the EDP cable. Then, remove the LCD panel with hinges.
Figure 50. Disconnect the EDP cable and remove the LCD panel with hinges
Go to
https://support.lenovo.com/partslookup
replacement part:
LCD panel with hinges

Remove the microphone rubbers

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 54
"Remove the LCD bezel" on page 57
"Remove the stripe covers" on page 57
"Remove the LCD panel with hinges" on page 58
Step 1.
Remove the microphone rubbers.
Number of screws
8
2
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
59

Advertisement

Table of Contents
loading

Table of Contents