Table of Contents
Advertisement
NOTE:
The location of the above message depends
on the destination country of the vehicle. Only
the countries shown on this pop-up screen will
be available with voice recognition functions
for address and destination selection. The
available countries will change according to
the language type selected by the driver.
The "one-shot" address entry mode will not be
available if the driver chooses a language
other than the one used in the country in which
the car was marketed. In this case, in order to
access the voice recognition functions and
enter a valid address, you will need to send to
the radio system a voice command to change
country in advance (for each use of the car).
Route Options
Press the Route Options button to show the route
options.
NOTE:
Press the Cancel button to interrupt the calcula-
tion process and return to the graphic keyboard
where you can change the previously selected
address.
Alternative routes
Once the address has been entered, the
display will show the "Route Alternatives"
screen. For each destination, the display
shows: arrival time distance (in miles or
kilometers), route information (e.g. "Fastest",
"Shortest" and "Eco") and relative graphic
icons (the order of display of route information
is always "Fastest" - "Shortest" - "Eco")
Select the destination required: navigation will
start automatically
56
The "Route alternatives" screen is interactive: the
following actions are possible by interacting with
it using the touchscreen function:
Pressure and up/down drag: Zoom + /
Zoom – of the Map
Left/right movement: Horizontal movement of
Map
Pressing and holding down an object on the
Map: Starting point
Pressing the list of alternative routes:
Selection of a route
With the "Route Alternatives" display active,
pressing the button
returns to the system
Main menu.
No route will appear on the Navigation mode
widget until one of the following happens:
Once a few seconds have passed without any
action, Navigation will be started automatically
If the Navigation widget is pressed before the
end of this time, the "Route Alternatives"
screen will be displayed again
With the "Route Alternatives" display active,
pressing the < graphic button displays
If "Confirm" is selected, the display will return
to the screen with the graphic keypad and the
list of the "Recent Destinations"
Select "Cancel" to return to the "Route
Alternatives" screen
Loading a route
Every time an address is entered, the sidebar will
show the loading percentage (e.g. 85%) followed
by the word "Loading...". These indications will
disappear as soon as the route has been loaded.
It will not be possible to start the navigation until
the radio system has calculated and displayed
the route loading message. This phase may take
a few seconds for long-range destinations. The
radio system will then display information about
the distance and estimated time of arrival ("ETA")
for the calculated route.
The current position and the destination are
displayed on the Navigation Map.
If the < graphic button is pressed, the display
shows a "Stop Navigation?" message
page 49.
Ú
Pressing the Home button returns to the
system Main menu; the route will not be
calculated.
Turn Indications
The screen for the right turn indication is shown
on the display when the driver is about to perform
the next action.
Advertisement
Table of Contents
