Table of Contents
Advertisement
4. Two-finger pinch: Zoom +/Zoom -
5. Two finger press and a vertical swipe: Vertical
tilt of map
Using the commands on the center stack
The Rotary Pad offers the following actions:
Pushing on Rotary Pad: Activation of graphic
sidebar
Left/right movement: Activation/deactivation
of graphic side bar
Clockwise/counterclockwise rotation:
(with graphic sidebar deactivated)
Zoom + / Zoom – of the map
Clockwise/counterclockwise rotation:
(with graphic sidebar activated) Icon/option
selection
ZOOM (MAP
ENLARGEMENT/
REDUCTION)
The Zoom function is only active with the graphic
sidebar deactivated.
When a given level of "Zoom –"is reached
(scale "2 km"), display of the Map automatically
switches to "North/South".
When the function is active, the display shows the
graphic indicator of the zoom scale (1 km). This
indicator disappears after a few seconds.
SET DESTINATION
The following data are required to set a
destination:
"City/ZIP code": Enter the name or ZIP code of
the city where the arrival point of the new
destination is
"Address": Enter the street name of the new
destination
"House Number": Enter the house number of
the new destination
"State" (if applicable): Enter the name of the
state where the arrival point of the new
destination is
"Start Navigation": Once the desired
destination has been set
To set a new destination, proceed as follows:
Select the graphic button
(using the
touchscreen function or by turning the Rotary
Pad)
The display will show the graphic keypad for
entering the address of the destination and,
the list of the "Recent Destinations"
Management Of Voice Recognition For Entering
Navigation Addresses
Push the VR button to start the voice
recognition session, and enter a
navigation address using voice
commands.
You can enter addresses in two different ways:
One-shot: Say "Navigate to <City,
Address, House Number>" after
pressing the VR button to start the
voice recognition session. The radio
system will be able to recognize the address
you inserted or display a list of possible
alternatives. Follow the instructions provided
by the radio system to start route calculation.
Manual Entry: The radio system will help the
driver enter the individual fields through a
guided procedure, with the possibility of using
the "City", "Address" and "House Number"
voice commands. To activate this mode, push
the VR button
to start the voice recognition
session and send the first command to enter
the city and continue following the instructions
provided by the radio system. If a language
change is made on the radio system, using the
dedicated menu in the "Settings", a pop-up
screen will appear to inform the driver about
the limited availability of the voice recognition
functions.
55
Advertisement
Table of Contents
