Cisco 2691 Installing And Formatting page 26

Compactflash memory cards

Hide thumbs Also See for 2691:

Table of Contents

File and Directory Procedures

Operations for Use with Class C Flash File System

The following file and directory operations are useful for CompactFlash memory cards formatted with

a Class C Flash file system.

File Operations for Class C Flash File System

Copy files

To copy files to another location, enter the copy {flash: | slot0:} command.

The following example shows output for copying a Cisco IOS file from an external CompactFlash

memory card to an internal CompactFlash memory card:

Router# copy slot0:c3725-i-mz.tmp flash:

Destination filename [c3725-i-mz.tmp]?

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

6458584 bytes copied in 202.940 secs (31973 bytes/sec)

The following example shows output for copying a configuration file to the startup configuration in an

internal CompactFlash memory card (

Router# copy flash:my-config1 startup-config

Destination filename [startup-config]?

[OK]

517 bytes copied in 4.188 secs (129 bytes/sec)

The following example shows output for copying a configuration file to the running configuration in an

internal CompactFlash memory card (

Router# copy flash:my-config2 running-config

Destination filename [running-config]?

709 bytes copied in 0.72 secs

Display the contents of a CompactFlash memory card

To display the contents (directories and files) of a CompactFlash memory card formatted with a Class C

Flash file system, use the dir{flash: | slot0:} or show {flash: | slot0:} command.

The following examples show outputs for displaying the contents of an external CompactFlash memory

card with a Class C Flash file system:

Installing and Formatting Cisco 2691, Cisco 3631 and Cisco 3700 CompactFlash Memory Cards

flash:

March 2002

78-13892-03

Table of Contents

3631 3700