Cisco 2691 Installing And Formatting page 13

March 2002
Figure 12
1
Removing an Internal CompactFlash Memory Card
Cisco 2691 routers, Cisco 3631 routers, and Cisco 3700 series routers have an internal connector on the
CPU/mainboard that may hold a CompactFlash memory card.
After removing the plug-in CPU/mainboard or the chassis cover as described in the
CPU/Mainboard" section on page 7
the following steps to remove an internal CompactFlash memory card from the router:
Step 1 Locate the CompactFlash memory card on the CPU/mainboard. (See
Figure
If there is a retention screw, remove it from the standoff, using the Phillips screwdriver; save the
Step 2
retention screw for reinstallation.
Carefully pull the CompactFlash memory card free from the connector.
Step 3
78-13892-03
Removing the Cover from a Cisco 3725
Lift cover
7.)
Installing and Formatting Cisco 2691, Cisco 3631 and Cisco 3700 CompactFlash Memory Cards
Internal CompactFlash Memory Card Installation and Removal
2
Slide cover
or in the "Removing the Chassis Cover" section on page
2
1
"Removing a Plug-in
9, complete
Figure 4, Figure 5, Figure 6, or
13