Cisco 2691 Installing And Formatting page 19

March 2002
Figure 17
1 Insert tabs and slide cover
Reinstall the cover screws.
Step 4
Reinstall the chassis on a rack or desktop.
Step 5
Reconnect network interface cables.
Step 6
Power ON the router.
Step 7
After wiring the DC power supply, remove the tape from the circuit breaker switch handle and
Warning
reinstate power by moving the handle of the circuit breaker to the ON position. To see translations
of the various warnings that appear in this publication, refer to the Regulatory Compliance and
Safety Information document that accompanied this device.
78-13892-03
Replacing the Cover on a Cisco 3725
Installing and Formatting Cisco 2691, Cisco 3631 and Cisco 3700 CompactFlash Memory Cards
Internal CompactFlash Memory Card Installation and Removal
1
2 Close cover
2
19