Medeli AK603 Owner's Manual page 13

2.
An Ending is commonly used at the end of a performance. This
instrument features three built-in Ending sections. Press one of the
[ENDING 1] - [ENDING 3] buttons to start the Ending section in the
next measure. The Style play back will stop when the Ending finishes.
[MAIN A] - [MAIN D]
Main is used for the loop part of the song. This instrument features four
built-in Main sections.
Press the [MAIN A] - [MAIN D] buttons during style playback to shift
between different patterns. The new Main section will start playing at
the next measure.
[BREAK]
When in Style playback, using a Break section can give even more dynam-
ics to the Main section loop.
As the Style plays, press the [BREAK] button to play a Break section in the
next measure.
After the Break plays, it will automatically return to the Main loop section.
Control Buttons
[START/STOP]
Start or stop playing back the Style. When the Style is playing, the [START/
STOP] button LED flashes according to the current tempo.
[SYNC START]
Start Style playback when playing the keyboard.
When [CHORD MODE] is turned off, turn on the [SYNC START] button,
and the percussion channels will start playing when you press any key.
When [CHORD MODE] and [SYNC START] are both turned on, the Style
playback will be triggered by playing a chord in the keyboard chord detect
area.
[SYNC STOP]
To stop the style when releasing the chord, press the [SYNC STOP] but-
ton. This only happens when [CHORD MODE] is enabled.
When [SYNC STOP] is turned on, the style stops when you release the
chord. [SYNC START] will then automatically turn on for you to easily con-
trol the Style start and stop.
[AUTO FILL IN]
Turn on [AUTO FILL IN] by pressing the button. It will automatically play a
Fill when you switch between Main Patterns. Putting Fills in your Style per-
formance gives variation to the song between Main parts. This instrument
features four built-in Fill sections. After the Fill plays, it will automatically
return to the Main loop section.
Style
13