Table of Contents
Advertisement
1
Place the carton horizontally with the foam arrow facing upwards, open the carton, and
take out the device and foam.
2
Remove the base support from the foam, and use screws to connect the base to the
support.
3
Tilt the upper end of the base support so that it fits into the slot on the back of the
monitor, and press the base support downwards until you hear a clicking sound, which
indicates that the base support has been correctly attached.
4
Hold the assembled monitor with both hands, and place it on a flat desk. Feel free to
adjust the tilt angle, swivel angle, and height to suit your needs.
5
To disassemble the monitor, place it on the desk, push the quick release button on the
back of the monitor upwards, and lift the bottom of the support.
Assembling and Disassembling the Monitor
7
Advertisement
Table of Contents
