Assembling And Disassembling The Monitor - Huawei MateView SSN-CAA User Manual

Assembling and Disassembling the
Monitor
Configuring SSN-CAA:
1
Place the carton horizontally with the foam arrow facing upwards, open the carton, and
take out the device and foam.
2
Remove the base from the foam.
3
Lift the display post slightly, and attach the base to the bottom of the post. When you
hear a click, it means that the base has been correctly attached.
4
Hold the assembled monitor with both hands, and place it on a flat desk. Feel free to
adjust the tilt angle to suit your needs.
5
To disassemble the monitor, place it on the desk, push the quick-release tab on the base
inwards with one hand, and hold the post with the other hand to push the base outwards.
Configuring SSN-CBA:
4