Huawei MateView SSN-CAA User Manual page 7

1
Place the carton horizontally with the foam arrow facing upwards, open the carton, and
take out the device and foam.
2
Remove the base support from the foam, and use screws to connect the base to the
support.
3
Tilt the upper end of the base support so that it fits into the slot on the back of the
monitor, and press the base support downwards until you hear a clicking sound, which
indicates that the base support has been correctly attached.
4
Hold the assembled monitor with both hands, and place it on a flat desk. Feel free to
adjust the tilt angle, swivel angle, and height to suit your needs.
5
To disassemble the monitor, place it on the desk, push the quick release button on the
back of the monitor upwards, and lift the bottom of the support.
Configuring SSN-CAABZ:
Assembling and Disassembling the Monitor
5