Washing Sequence - Haier HWM35-AS User Manual

Washing sequence

Wash timer Wash selector
(To set to below 2 minute,
(Strong current,
first set to 5 minute then
standard current)
turn it back. it can increase
the service life of the timer).
OFF
STANDARD
WASH SELECTOR
WASH TIMER
Note:All above are sketch maps,referring to the different function and framework,
because of different models,please
Wash
1.Water-filling selector(Part of types do not havesuch frame,
please according to your purchased model concretely)
(1) Set the water-filling selector at the "WASH" side.
(Figure 1)
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, the buzzer will ring
havesuch frame ,please according to your purchased model
concretely) . Set the "WASH SELECTOR" at "DRAIN". (Figure 5).
Water-filling entrance
STRONG
(SOFT)
DRAIN
Overfilling sign
Buzzer
(The buzzer will ring when
the washing finishes)
OFF
MAX
BUZZER
according to your purchased model concretely
WASH SELECTOR
Part of types do not
Using process
Using process
Water-filling selector handle
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
SPIN TIMER
WASH SPIN
Figure 1
Figure 2
STRONG
STANDARD
DRAIN
Figure 3
WASH TIMER
OFF
Figure 4
WASH SELECTOR
STRONG
STANDARD
DRAIN Figure 5