Yamaha TW200ET Owner's Manual page 53

2. To raise the brake pedal, turn the
adjusting bolt in direction (a). To
lower the brake pedal, turn the ad-
justing bolt in direction (b).
(a)
(b)
1 2
1. Locknut
2. Adjusting bolt
3. Brake pedal position
3. Tighten the locknut.
WARNING
After adjusting the brake pedal posi-
tion, the brake pedal free play must
be adjusted.
Brake pedal free play
The brake pedal free play should mea-
sure 20.0–30.0 mm (0.79–1.18 in) as
shown. Periodically check the brake
PERIODIC MAINTENANCE AND MINOR REPAIR
pedal free play and, if necessary, adjust
it as follows.
3
1. Brake pedal free play
To increase the brake pedal free play,
turn the adjusting nut at the brake rod in
direction (a). To decrease the brake
pedal free play, turn the adjusting nut in
direction (b).
EWA11230
1
1. Brake pedal free play adjusting nut
6-18
(a)
1
(b)
WARNING
G
After adjusting the drive chain
slack or removing and installing
the rear wheel, always check the
brake pedal free play.
G
If proper adjustment cannot be
obtained as described, have a
Yamaha dealer make this ad-
justment.
G
After adjusting the brake pedal
free play, check the operation of
the brake light.
2
3
EWA10680 4
5
6
7
8
9