Table of Contents
Advertisement
Loading, wrapping and unloading bales
Loading bales on bale wrapper one should carry out using the available devices with lifting capacity more
than 1000 kg and with the possibility of lifting at the height of the minimum 1m. Loading and wrapping
bales should be carried out in an area of subsequent storage of bales. This will prevent damage to the
film, that may take place during the movement of bales. Before loading, rotating frame with drums
should be set along the tractor. Such setting provides the best access to the machine during loading and
operating/maintenance during the wrapping. Bale wrapper with the tractor should be on level ground and
pin, which locks the lower frame should be protruding. Before starting the wrapping, bale should be in
the center of the length of the rotating drums at equal distances from the side wheels. Next, you need
attach the tip of the film, which protrudes from the feeder to bale, preferably to string as far away from
feeder.
Advertisement
Table of Contents
