Table of Contents
Advertisement
Length
Working Width
Weight of Machine
Dimensions of Bales Being Wrapped
Diameter
Length
Weight of Bales
Horsepower Requirement
Moun ng Method
Bale Wrapper Drive
Type of Oil in the Hydraulic System
Tractor Engine Revolu ons
Roller Rota ons
Bale Loading Device
Minimum Number of Bale Wraps
Total Time for Double Wrapping (with a diameter of 4')
Total Number of Wraps (for bales with a diameter of 4')
Wrapping Counter
Type of Wrapping Film
Film Wrapping
Unloading Wrapped Bales
Bale Wrapper Opera on
Technical & Opera onal Informa on
100 inches
55 inches
1,091 lbs.
39 inches ‐ 63 inches
Up to 55 inches
Up to 2100 lbs.
40 HP Minimum
3 Point Hitch
Hydraulic Motor
Gear Oil
1500 RPM
2 RPM
Loading device with li ing capacity greater than the weight of
the bales being wrapped with the ability to li bale higher than
4'.
2 (double with overlapping)
approx. 90 seconds
30" film ‐ 18 wraps (20" film ‐ 26 wraps)
Electronic
Special polyethylene film, 0.025‐0.03mm thick which is stretcha‐
ble, self‐adhesive, with ultra‐violet ray stabilizer
Rotary knives on a fixed bracket, the rota ng frame cu ng a er
loading the next bale a er the first rota on of the frame
By l ng the lower frame (together with the rota ng frame and
the bale) backwards a er unlocking it (by pulling the line) and
a er par al li ing of the wrapper on the 3‐Point Hitch of tractor
2 people—1 opera ng wrapper on tractor, 1 loading the bales
Advertisement
Table of Contents
