Table of Contents
Advertisement
Installation and adjustment
Adjust the installation position
The largest allowed slope of the base of the machine is 2 . The slanting or rough
ground will result in unstable running or stoppage of the machine. Please adjust
it with following methods:
Confirm it's horizontal:
Hang the lead line to confirm
if it is horizontal.
Install the drain hose
Put the drain hose clamp on the outer
drain hose, insert the outer drain hose
into the joint, and then clutch tightly
with drain hose clamp.
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.put the drain hose up to suitable position.
2.Do not step on or press the drain hose.
Install the bottom plate
After you open the package, please lean the washing
machine gently down on soft items ( like the towel cloth,
blanket, etc. ). Install the bottom plate to the bottom of
the machine with the ten screws by a cross screwdriver,
then lift the machine up gently. See to the figure:
Adjust the adjustable foot:
To twist the adjustable foot, please first lift up
the side of the foot slightly, and twist the foot.
.
High
Screw
4
Adjustable foot
Low
Drain hose
Drain hose clamp
Drain hose joint
1.0m-1.5m
Bottom plate
Soft material
Front
Back
Advertisement
Table of Contents
