Table of Contents
Advertisement
Quick Links
Thanks for your purchase. Any questions please don't hesitate to contact us,
We will handle all your problem ASAP. Your feedback is vital to us! And we
will always try to do better. For more details, please contact us by email via
support@rovsun.com. (Write your seller's Order # on the subject of the email,
so that we can find your order and better assist your issue) .
CONSUMER SAFETY INFORMATION
Read this manual before installing and operating this appliance
Failure to follow these instructions may result in electric shock, fire property,
or personal injury
Do not store or use gasoline or other flammable liquids in vicinity of this
appliance.
Electric Fireplace
IF-1350TCL
Advertisement
Table of Contents
Related Manuals for Heartland IF-1350TCL
Summary of Contents for Heartland IF-1350TCL
- Page 1 Electric Fireplace IF-1350TCL Thanks for your purchase. Any questions please don't hesitate to contact us, We will handle all your problem ASAP. Your feedback is vital to us! And we will always try to do better. For more details, please contact us by email via support@rovsun.com.
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION! WARNING Read all instructions before using this heater! This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater, and keep them away from the sides and rear. - Page 3 NEVER use a wall mount bracket from another manufacturer. This product is not intended to be a primary heat source. It is for supplemental heat only. INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric shock! ...
-
Page 4: Parts & Hardware
PARTS & HARDWARE B- Wood Screws C-Drywall anchors A- Fireplace Remote control D-Metal Bracket E-Wall Bracket F-Decorative H-Log set Crystals Fixed on back of firebox Specification and Dimension PRODUCT DIMENSIONS Model Number IF-1336 36.00” 21.42” 5.51” 32.65” 20.24” 11.81” 30.49” 914.5cm 54.4cm 14.0cm... -
Page 5: Installation And Assembly
IF-1380 80” 17” 5.51” 76.285” 16.25” 9.13” 73.7” 203.2cm 43.2cm 14.0cm 193.75cm 41.27cm 23.2cm 187.2cm Installation and Assembly Your appliance is a wall-mounted, recessed and /or mantel installed appliance. Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high traffic areas. NOTE：... - Page 6 RECESSED TO WALL INSTALLATION STEP A. Selection a dry wall to open a hole for fireplace box. Size of hole as below chat Figure (A) Framing Hole Size Model Number IF-1350 47.44”(120.5cm) 20.5”(52.1cm) STEP B. Fix the three wall anchors in each side of the fireplace box according to the dimensions Showed on the drawing.
- Page 7 STEP C. Take off the two screws in both sides of fireplace. Figure (C) STEP D. Have two person to take the glass panel out of the fireplace box. Place it to a soft and clean place. Figure (D) STEP E. Have two person to move the fireplace box to the wall hole. If the appliance is fully recessed into the wall: ...
- Page 8 Wall Mounted Installation Due to the many different materials used on different walls, it is highly recommended that you consult your local builder before you install this appliance on the wall. A. Select a location that is not prone to moisture and is located at least 36”(914mm) away from combustible materials such as curtain drapes, furniture, bedding, paper, etc.
- Page 9 HARD WIRING INSTALLATION WARNING TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANE. Log set /Crystal Ember Installation (Note: Please make the installation according to the embers which you bought or selected.) A.
- Page 10 Figure 3.(Crystal medias) WARNING Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure do to so could result in electric shock, fire, serious injury, or death. Power Plug the power cord into a 110-120V Volt 12 Amp grounded outlet (see IMPORTANT SAFETY INFORMATION on Pages 2 and 3).Make sure the outlet is in good condition and that the plug is not loose.NEVER exceed the maximum amperage for the circuit.
- Page 11 COLOR button: Makes the color flame effect changing. 1. Press once. Flame color effect gets changing. 2. Press again until desired setting is reached. COLOR FLAME button: Makes flame effect dimmer and brighter. 1. Press once. Flame brightness effect gets NOTE: Flame effect stays on until power button is turned changing.
-
Page 12: Care And Maintenance
CARE AND MAINTENANCE Cleaning ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury. -
Page 13: Troubleshooting
Troubleshooting WARNING DISCONNECTED THE APPLIANCE COMPLETELY AND LET COOL PRIOR TO ANY SERVICE. ONLY A QUALIFIED SEVICE PERSON SHOULD SERVICE AND PEPAIR THIS ELECTRIC APPLAINCE. Problem Possible Cause Solution 1. Fireplace turns off 1. Fireplace has overheated 1. Reset switch by turning main and will not turn on.