Page 1
INFRARED ELECTRIC FIREPLACE HEATER MODEL # : BEF-26BM02 OWNER’S MANUAL 26 Inch Black Infrared Electric Fireplace AC 120V 60Hz 1200W Read and understand this entire owner’s manual, including all safety WARNING information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury.
IMPORTANT SAFETY INFORMATION! WARNING ALWAYS keep electric cords, home furnishings, drapes, clothing, papers, or other combustibles at least 3 feet (0.9m) away from the front of this heater, and away from the bottom, sides, and rear of this heater. ...
Page 3
WARNING Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, before replacing the light bulb, or before relocating the electric fireplace. NEVER use this heater in bathrooms, laundry rooms, or any other location where the heater could fall into a bathtub or pool, become damp or come in contact with water.
Preparation This product includes a GLASS panel! Always use extreme caution when using. Failure to do so could result in personal injury or property damage. Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Check the parts list to make sure nothing is missing.
Front View Control Buttons Hot Air Vents LED Display NOTE: LED Display will goes to sleep mode 10s after operation, press any button to wake it up. Control Buttons LED Display Remote Control Remote Control Operation BUTTON FUNCTION ACTION & INDICATION ON: Enables control panel functions and 1.
2. 1. Press once. LED Indicator light turns FLAME “+”: Makes flame effect brighter. on, Flame effect brighter get ready to NOTE: Flame effect stays on until power adjust. button is turned off. Flame effect must be 2. Press again until desired setting is FLAME + on for heater to turn on.
Remote Control Battery Information This remote control uses two AAA batteries (Not included). NEVER dispose of batteries in fire. Failure to observe this precaution may result in an explosion. Dispose of batteries at your local hazardous material processing center. Care and Maintenance Cleaning ALWAYS turn the heater OFF and unplug the power cord from the outlet before...
Troubleshooting WARNING DISCONNECTED THE APPLIANCE COMPLETELY AND LET COOL PRIOR TO ANY SERVICE. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE. Problem Possible Cause Solution 1. Reset switch by turning main 1. Fireplace turns off 1. Fireplace has overheated and will not turn on.