Heartland IF-1350TCL Manual page 9

HARD WIRING INSTALLATION
WARNING
TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED
SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANE.
Log set /Crystal Ember Installation
(Note: Please make the installation according to the embers which you bought or selected.)
A. Glass front must be removed and the appliance must be mounted in its final location before the log
set/crystal/pebble embers are installed.
B. If your fireplace come with log set, remove the log set from the package, put it to the fireplace designed
place.
Figure 1.
C. If your fireplace come with CLEAN CRYSTAL MEDIA: crystal may have a fine oil residue that needs to
be cleaned prior to installation. Clean them with mild dish soap, drain, rinse thoroughly and dry before placing
into the tray.
D. Place the plastic tray(I) to the fireplace designed place. Then carefully place crystal embers into the bottom
tray on the front of the appliance as illustrated. Apply an even layer from side to side. Figure 2, Figure 3.
9