Haier HLT364XXQ User Manual page 7

Water level
Water levels may be set at the beginning of the wash or at
pause.
During Soak, Wash or Rinse press this button to manually
replenish water. Release to stop. Function automatically is
inactive when water reaches the overflow protection level.
Cycle Signal
Signal volume can be adjusted softer, louder or off.
Soil Level
Select clothes soil level.
Wash cycle increases 2 minutes for every soil level increased
Temperature Wash/Rinse
To select inlet water temperature for wash and rinse.
Power On/Off
Push the Power On/Off button to switch the machine on or
off.
Start/Pause
Once washer is powered and selections are chosen, push this
button once to start the wash.
While unit is working, push this button once to pause it.
If unit is in Pause mode, push this button once to resume
operation.
Delay Start and Estimated Time Indicator
Indicates remaining minutes when cycle is in progress.
Indicates remaining hours during delay process.
Indicates fault codes or conditions that are not normal.
6