Haier HLT364XXQ User Manual page 18

3. Install the drain hose hook to the outer drain hose tube. Using the
drain hose clamp, attach the drain hose to the unit as shown below.
4.Plug the washer into a regular 120Volt/60Hz,10Amps outlet.
Note :Carefully inspect all around the machine and at the back for any
leaks, and tighten any loose connections.
Caution:If, after completing these steps, you are unsure that unit is
properly installed, contact a qualified installer.To ensure that
your washer is properly installed, it is recommended that it
be installed by a certified installer.
17