Fig. 53: Fitting The Nozzle Ring (A180-L And Larger); Table 36: Tightening Torque (56014) - ABB XAC25354 Operation Manual

Operation Manual / A100-L
9 Disassembly and assembly / 9.17 Fitting the nozzle ring (≥ A180-L)
Fig. 53: Fitting the nozzle ring (A180-L and larger)
Product
A180-L
A185-L
A190-L
Table 36: Tightening torque (56014)
1. Fit the nozzle ring holder (90477) on the flange of the gas inlet casing (51001) with
screws (B ).
1
2. Remove screws (B
3. Align the notch (A
1
and slide the nozzle ring into the gas inlet casing.
4. Coat screws (56014) with high-temperature grease and fit with washers (56011).
5. Remove screws (B
© Copyright 2021 ABB. All rights reserved.
).
2
) on the cam of the nozzle ring (56001) with the flange connection (A
) along with the nozzle ring holder (90477).
1
Size
M12
M12
M16
HZTL4034_EN
Tightening torque [Nm]
65
65
170
Rev.T December 2021
)
2