Fitting The Nozzle Ring (≤ A175-L); Fig. 49: Fitting The Nozzle Ring (A175-L And Smaller); Table 34: Tightening Torque (56014) - ABB XAC25354 Operation Manual

Operation Manual / A100-L
9 Disassembly and assembly / 9.14 Fitting the nozzle ring (≤ A175-L)
9.14 Fitting the nozzle ring (≤ A175-L)
Coat the screw threads with high-temperature grease.
u
Fig. 49: Fitting the nozzle ring (A175-L and smaller)
Product
A165-L
A170-L
A175-L
Table 34: Tightening torque (56014)
1. Align the notch (A
1
the gas inlet casing (51001).
2. Fit screws (56014) with high-temperature grease and with washers (56011).
© Copyright 2021 ABB. All rights reserved.
) with the flange connection (A
Size
M10
M10
M10
) and slide the nozzle ring (56001) into
2
HZTL4034_EN
Tightening torque [Nm]
35
35
35
Rev.T December 2021