Fig. 59: Fitting The Filter Silencer; Table 41: Tightening Torque (72004) - ABB XAC25354 Operation Manual

Operation Manual / A100-L
9 Disassembly and assembly / 9.22 Fitting the filter silencer
9.22.2 Fitting the filter silencer (welded)
If the turbocharger is also fitted with a noise package, chapter
noise package →103 must be observed.
Fig. 59: Fitting the filter silencer
Product
A165-L
A170-L
A175-L
A180-L
A185-L
A190-L
Table 41: Tightening torque (72004)
1. Attach lifting gear to the eyelets of the filter silencer (81000).
2. Position filter silencer on compressor casing.
3. Fit nuts (72004) with washers (72003) and tighten.
Fit insulation as far as necessary.
u
© Copyright 2021 ABB. All rights reserved.
Fitting the filter silencer with
Size Tightening torque [Nm]
M14
M16
M18
M20
M22
M24
HZTL4034_EN
130
200
300
420
570
710
Rev.T December 2021