Faq - Eclipse Security ECL-IP3B100V User Manual

6 FAQ

Bug
I can not boot up
the device.
Micro SD card
write times
I can not use the
disk as the storage
media.
I can not upgrade
the device
network.
Recommended
Micro SD card
brand
Audio function
To guarantee
setup update
Power adapter
Rear bracket is not
stable
SD card reading
error
Please click RESET button for at least five seconds to restore
factory default setup.
Do not set the Micro SD card as the storage media to storage the
schedule record file. It may damage the Micro SD card duration.
When disk information is shown as hibernation or capacity is 0,
please format it first (Via Web).
When network upgrade operation failed, you can use port 3800 to
via
continue upgrade.
Support Micro SD card, we recommend 4GB or higher industry-level
high speed card.
Please use active device for the audio monitor input, otherwise there
is no audio in the client-end.
After you modified the important setup, please reboot the device via
the software to make sure the setup has been updated to the
storage medium.
The general power adapter included in the accessories bag can
work ranging from 0℃ to 40 ℃. The device may result in unstable
power supply when the temperature exceeds the working
temperature.
Please replace an industry-level power adapter if you are using in
the harsh environments.
The rear bracket requires to be tightened with a S3 inner hex
wrench, and user shall manually check if it is fastened or not.
Re-plug in SD card, if it still does not work, the SD card may be
damaged.
21