Table of Contents
Advertisement
16. TROUBLESHOOTING
Issues of Improper Operation Belt Burning
Possible Causes
Loading the ATV into a
pickup or tall trailer
Starting out going up a
steep incline
Driving at low RPM or low
ground
speed
approximately
5-8km/h）
Insufficient
warm-up
ATV's
exposed
ambient temperatures.
Slow
and
easy
engagement.
Stuck in mud or snow.
Battery Wane
Possible Causes
Starting a faulty engine for
long time
Let the main switch (key)
on while parking the ATV
Solutions
Never operate ATV on hills steeper than
15％.
Dismount the ATV after first applying the
park brake and perform the "K" turn as
described in this manual.
Drive at higher speed
(at
3-5MPH/
of
Warm engine at least 5 min. The belt will
to
low
become more flexible and prevent belt
burning.
clutch
Fast, effective use of the throttle for efficient
engagement.
Shut off the engine and dismount, pull the
ATV out of the mud.
Solutions
See"8.STARTING THE ENGINE"
And check the fuel/ air/ ignition/
compression system
When stopping the engine turn off
the main switch (key) off at once
90
Advertisement
Table of Contents
