Echo GT-200EZR Operator's Manual page 20

20
1. Disconnect spark plug lead (A) from spark plug.
2. Remove spark plug lead grommet from top of engine cover.
3. Release stored energy in EZR Starter power spring by removing
spark plug.
4. Remove three (3) screws (B) from EZR Starter Assembly and
remove EZR Starter.
NOTE
DO NOT disassemble the EZR Starter Assembly.
5. Remove the five screws that retain the engine cover. Two at the
inside top of the EZR mounting plate (C), two on either side of the
front (D), and one at the muffler cover (E).
6. Disengage the heat deflector tabs (F) under the muffler from the
slots in the engine/muffler cover.
A
E
F
D
B
C