1. Manuals
  2. Brands
  3. Echo Manuals
  4. Trimmer
  5. GT-200i
  6. Operator's manual

Echo GT-200i Operator's Manual

Grass trimmer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Grass Trimmer
Operator's Manual
MODEL
Read rules for safe operation and instructions carefully. ECHO provides an Operator's
Manual and a Safety Manual. Both must be read and understood for proper and safe
operation.
X7712270001
GT-200

Serial Number 05001001 - 05999999

WARNING
DANGER
X771000011
10/03

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GT-200i and is the answer not in the manual?

Questions and answers

Related Manuals for Echo GT-200i

Summary of Contents for Echo GT-200i

  • Page 1: Serial Number

    MODEL GT-200 Serial Number 05001001 - 05999999 WARNING DANGER Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation. X771000011 X7712270001 10/03...

  • Page 2: Table Of Contents

    NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operations tips and SAFETY messages.

  • Page 3: Manual Safety Symbols And Important Information

    Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.

  • Page 4: International Symbols

    • Do not remove shields, modify the unit or install attachments or parts not approved by ECHO. Approved attachment information and replacement Operator's and Safety Manuals are available from your ECHO dealer or by writing: ECHO, INCORPORATED, 400 OAKWOOD RD., LAKE ZURICH, IL 60047. INTERNATIONAL SYMBOLS...

  • Page 5: Safety Instructions

    Hearing Protection are cooler. Wear hearing protection. ECHO recommends wearing hearing protection whenever unit is used. EXTENDED OPERATION EXTREME CONDITIONS To reduce the risk of RSI/CTS, do the...

  • Page 6: Equipment

    Use only ECHO approved attachments. Serious injury may result from the use of a non approved attachment combi- nation. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual.

  • Page 7: Emission Control

    After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
  • Page 9 20. SAFETY VIDEO - (Not included with unit) P/N 99922202540 English version and P/N 99922203508 Spanish version are available at a cost of $5.00 from ECHO, INC. or any authorized ECHO dealer. The video overviews safety precau- tions and proper operating techniques and is supplemental to the Safety Manual. Read and understand the Safety...

  • Page 10: Specifications

    PECIFICATIONS MODEL ------------------------------------- GT-200 Length ------------------------------------------------- 1,410 mm ( 55.5 in.) Width -------------------------------------------------- 310 mm (12.2 in.) Height ------------------------------------------------- 385 mm (15.2 in.) Weight (dry) w/Cutter Head ------------------------ 4.35 kg (9.6 lb.) Engine Type ------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine Bore ---------------------------------------------------- 32.2 mm (1.29 in.) Stroke -------------------------------------------------- 26.0 mm (1.02 in.) Displacement ----------------------------------------- 21.2 cc (1.29 cu.

  • Page 11: Assembly

    RASS RIMMER PERATOR ANUAL SSEMBLY Tools Required: Locking Tools (2), Wrench 17 x 14.5 (9/16 in.) Parts Required: Rapid Loader Head, Large washer, Small washer, 3/8-24 Locknut, (2) Pre-cut Nylon Line 8 in. x .080 in. WARNING DANGER Cut-off knife on debris shield has sharp edges. Avoid contact when installing or removing line head.

  • Page 12: Nylon Line Replacement

    NYLON LINE INSTALLATION 1. Shut engine off. Lay unit on the ground with head assembly up. 2. Remove old nylon line through center recess of head. 3. Thread new lines through outside holes (A) in housing until ends meet in center of recess. NOTE Insert cutting line ends to center of head recess to insure easy removal of used lines.

  • Page 13: Pre-Operation

    Echo premium Power Blend Universal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo engines sold in the past Storage regardless of ratio specified in those manuals. Fuel storage laws vary by locality. Contact...

  • Page 14: Operation

    WARNING DANGER Never attempt to disassemble this recoil starter otherwise serious personal injury may result. See your Echo Dealer if the starter handle will not operate using light pulling force. Stop Switch Move stop switch button (A) away from the STOP position.

  • Page 15: Starting Warm Engine

    The attachment should not move at idle, otherwise serious personal injury may result. NOTE If attachment moves, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer. Stop Switch Move stop switch button (A) away from the STOP position. Primer Pump primer bulb (C) until fuel will be visible and flows freely in the clear fuel tank return line.

  • Page 16: Stopping Engine

    ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your Echo dealer for repairs.

  • Page 17: Maintenance Intervals

    RASS RIMMER PERATOR ANUAL MAINTENANCE INTERVALS i l y t I - t l i t l i i l o l f f l i o s t l t n i ® ® o i t n i f i r u o i t .

  • Page 18: Air Filter

    AIR FILTER Level 1. Tools required: Cleaning brush 25 or 50 mm (1 or 2 in.) Parts required: 90008 REPOWER AIR & FUEL FILTER KIT. 1. Close choke (Cold Start Position [ ]). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumulated dirt from the air cleaner area.

  • Page 19: Spark Plug

    RASS RIMMER PERATOR ANUAL SPARK PLUG Level 2. Tools Required: Spark plug socket wrench and feeler gauge Parts Required: REPOWER Tune-Up Kit P/N 90074 Remove spark plug and check for fouling, worn and rounded center electrode. Clean the plug or replace with a new one. DO NOT sand blast to clean.
  • Page 20 Disconnect spark plug lead (A) from spark plug. Remove spark plug lead grommet from top of engine cover. Release stored energy in power spring by removing spark plug. Remove three (3) screws (B) from starter assembly and remove starter. NOTE DO NOT disassemble the starter assembly.
  • Page 21 RASS RIMMER PERATOR ANUAL Lift the cover from the engine and lay to the front of the trimmer. NOTE The spark plug lead remains in the cover. Reinstall spark plug and starter assembly to prevent dirt and debris from entering engine and starter. NOTE When installing starter housing to mounting body, be sure that drive starter cam engages the starter pawls correctly.

  • Page 22: Exhaust System

    High Altitude Adjustment High altitude adjustment is not required for proper operation of this engine. Level 2. Tools required: Screwdriver, tachometer (ECHO P/N 99051130017). Parts required: None. NOTE Every unit is run at the factory and the carburetor is set in compli- ance with emission regulations.

  • Page 23: Lubrication

    When carburetor adjustment is completed, the cutting attachment should not turn at idle, otherwise serious personal injury may result. LUBRICATION Level 1. Tools Required: 8mm Open end wrench, wcrewdriver, clean rag. Parts Required: ECHO LUBE 8 oz. (P/N 91014) or ® Lithium Base Grease. Remove plastic shield.

  • Page 24: Troubleshooting

    ROUBLESHOOTING i a r i l l r e l i l y i l y r e l f f u r e l h t i r u t r / n t l i f s t r r e l t ' n f f o...

  • Page 25: Storage

    RASS RIMMER PERATOR ANUAL TORAGE Long Term Storage (over 30 days) WARNING DANGER During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result.
  • Page 26 NOTES...
  • Page 27 RASS RIMMER PERATOR ANUAL NOTES...

  • Page 28: Servicing Information

    • Purchasing from your Echo Dealer. • Manuals are available by sending a written request stating the model number and serial number of your Echo unit, part number of the manual, your name and address, and mail to the address below.

Table of Contents