Advertisement
Exalt
Flow Sensor Replacement
Kit Part Number
EXRKIT58
Each Kit Includes:
• Flow Sensor
Recommended Tools:
• Phillips Head Screwdriver
• Flat Head Screwdriver
WARNING
!
Indicates a potentially hazardous situation which,
if ignored, can result in serious injury or substan-
tial property damage.
WARNING
!
For your safety, turn off electrical power supply
at service panel and allow unit to cool before pro-
ceeding to avoid possible electrical shock and
scald hazard. Failure to do so can cause severe
personal injury or death.
2019765 Exalt Flow Sensor Replacement
Revised 10/20/2021
Description
Flow Sensor Replacement
NOTICE
Indicates special instructions on installation, operation
or maintenance, which are important to equipment
but not related to personal injury hazards.
WARNING
!
Failure to follow instructions below can result in
severe personal injury or damage if ignored.
•
Instructions are for a qualified installer/ ser-
vice technician only.
•
Read all instructions before proceeding.
•
Follow instructions in proper order.
Model
Exalt 155 & 199 Combi
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for IDEAL EXRKIT58
Summary of Contents for IDEAL EXRKIT58
- Page 1 Exalt Flow Sensor Replacement Kit Part Number Description Model EXRKIT58 Flow Sensor Replacement Exalt 155 & 199 Combi Each Kit Includes: • Flow Sensor Recommended Tools: • Phillips Head Screwdriver • Flat Head Screwdriver NOTICE WARNING Indicates special instructions on installation, operation...
- Page 2 Exalt Flow Sensor Replacement 1. Preliminary Instructions 3way Valve Motor 1. Verify that the pressure sensor replacement kit is 3way Valve Hydroblock correct for the model of boiler. See table on page 1. 2. Carefully open and unpack the PARTS BOX from its shipping carton.
- Page 3 Exalt Flow Sensor Replacement 4. Give the sensor a light tug up to ensure the locking clip is engaged properly. 5. Open all isolation valves and the fill system on the boiler to refill the unit. Check for leaks around the flow sensor and reseal the device if necessary.
Need help?
Do you have a question about the EXRKIT58 and is the answer not in the manual?
Questions and answers